Veriyog International

MULTIPLE CHEMICAL DOSING SYSTEMS UNDER ONE ROOF! 
System house of,
- Ferric Chloride Dosing System
- Poly-electrolyte Dosing System
- PAC Dosing System

LP/HP Dosing System refers to Low-Pressure (LP) and High-Pressure (HP) dosing systems used in industrial processes, primarily for water treatment in boilers. These systems inject chemicals, such as anti-scalants, oxygen scavengers, or pH adjusters, into feed water to prevent scaling, corrosion, and improve system efficiency. The LP dosing system operates at lower pressures, typically before the feed water pump, while the HP dosing system functions at higher pressures, post-feed water pump. Both are equipped with dosing pumps, tanks, and control units, ensuring precise chemical dosing for optimal water conditioning in boilers and other processes.

A Chemical Dosing System is a system used in industrial processes to inject precise amounts of chemicals into a process stream. The chemicals are typically used to control various aspects of the process, such as pH levels, corrosion, scale buildup, and microbial growth..

The dosing system typically consists of one or more chemical storage tanks, pumps to deliver the chemicals to the injection point, and a control system to regulate the amount of chemical injected. The control system may be based on a feedback loop that monitors process parameters such as pH, conductivity, or turbidity, or it may be based on a set time schedule.s

he metering device in a Lime Dosing System can be either volumetric or gravimetric. Volumetric systems dispense a fixed volume of lime with each cycle, while gravimetric systems weigh the lime and dispense it based on weight. Gravimetric systems tend to be more accurate and precise, but also more complex and expensive.

Lime Dosing Systems are often used in combination with other process control equipment, such as pH sensors and controllers, to maintain the desired chemical conditions in the process. They are used in applications where precise control of lime addition is essential to achieving consistent product quality and process efficiency.

Technical Aspects: Available in ATEX, CE, ASME, API, IS…..etc.

The auto-polyelectrolyte dosing system consists of a dosing pump, a control unit, and a polymer tank. The dosing pump is used to inject the polyelectrolyte into the water or wastewater stream, and the control unit adjusts the dose of the polyelectrolyte based on the flow rate of the water or wastewater.

The polymer tank is used to store the polyelectrolyte solution, which is typically prepared by diluting a concentrated polymer solution with water. The concentration of the polyelectrolyte solution, as well as the dosing rate, is determined by the specific water treatment application.

The auto-polyelectrolyte dosing system is an automated and precise method of adding polyelectrolyte to water and wastewater, which helps to improve the efficiency of solid-liquid separation processes, reduce chemical consumption, and minimize the environmental impact of the water treatment process.